35451993

Industrial-Grade Electric Power Distribution Systems and More

Electrical Power and Control, LLC. (EP&C) is a Columbus, Ohio based company focused on providing control panels and electrical system equipment for utility, industrial, and commercial applications. We have and are providing equipment and support services for our customers both locally and around the world.

EP&C is unique to other control panel builders and control integrators in the fact that our primary specialization is in the power applications field. EP&C fills the gap that exists between the switchgear manufacturers and control system integrators.

EP&C supports our customer base with these panels and services, including out-of-production devices and refurbished electrical system components.

Control Panels

35469305.png
35469304.png

CONTROL PANELS UL508A LISTED AND NEC ARTICLE 409 COMPLIANT

MIMIC BUS PANEL

  • Duplicate Front View of Switchgear Layout of Single Line Layout
  • Remote Switching of Breakers and Motor Loads
  • Bus Metering Options for Voltage and Amperage

BREAKER CONTROL STATION

  • Single to Main-Tie-Main Arrangements
  • Can Be Mounted a Safe Distance from Power Device to Solve Arc Flash Boundary Requirements
  • Arc Flash Reduction Switches for Trip Unit Control

LIGHTING CONTROL PANEL

  • Warehouse and Interior Lighting Controls
  • Exterior Area Lighting and High Mast

D.C. MOTOR STARTER

  • Direct Across the Line Starting
  • Time Starting in Multiple Resistor Steps

GROUND DETECT PANEL

  • Cable Monitoring and Alarming for Power Busses

Power Distribution

35469296_kxfw.png
35469294.png

A.C. SWITCHBOARDS

  • Custom Fusible Switch or Breaker Arrangements and Bus Metering/Alarming Devices to 600VAC

D.C. SWITCHBOARDS

  • Custom Fusible Switch or Breaker Arrangements, Bus Metering/Alarming Devices, and Ground Detection

BATTERY DISCONNECTS

  • Up to 600VDC to 600Amps, 250VDC to 3000Amps, 125VDC to 3000Amps

MANUAL TRANSFER

  • 600VAC to 2500Amps
  • Fusible Overcurrent Protection

GENERATOR ROLL-UP

  • Main Lug Only or Circuit Breaker Overcurrent Protection
  • NEMA-1, 3R, 4X or 12 Enclosures

Services

EP&C offers equipment reconditioning services for Motor Control Center Buckets and Circuit Breakers. Through our many sources we also offer out-of-production electrical equipment procurement.

MCC BUCKET LIFE EXTENSION

  • Low Voltage MCC’s to 600Volt
  • Bucket Sizes 00 to 6
  • Upgrade Equipment to Manufacturers Current Product Offering
  • Incoming Inspection, Cleaning and Lubrication per Manufacturers Specification
  • Reconditioning or Upgrading of Components
  • Contact Resistance Test
  • Megger Testing of Insulation Systems
  • Written Test Report

CIRCUIT BREAKER MAINTENANCE and TESTING

  • Incoming Inspection
  • Cleaned and Lubricated per Manufacturers Specification
  • Contact Resistance Test
  • Megger Testing of Insulation System
  • Overcurrent Protection Test
  • Auxiliary Device Testing
  • Written Test Report

CIRCUIT BREAKER TRIP UNIT RETROFITS

  • Standard Maintenance and Testing Procedures
  • Overcurrent Protection Upgrade Based on Customer Consultations

VINTAGE PRODUCT SOURCING

  • Out of Production Power Distribution Devices
  • Circuit Breakers
  • Panelboard and Switchboard Fusible Switches
  • Motor Control Center Buckets